 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I am wiring two Marley electric baseboard heaters (240v) to a Programmable Thermostat and want to confirm the layout. BASEBOARDS Both Baseboards are 8 feet long, 240 volt, 2000 watt, 8.3 amps WIRE & Circuit BREAKER I am using 12/2 wire and connected to a double pull 20 amp circuit...
I am taking on an electrical project in my basement and I am looking for some guidance, I would like to install 3 basebaord heaters in all. 1 5 footer and 2 3 footers. My question is can I run three on on 2 20amp circuits? Any help would be greatly appreciated.
I recently moved in and the thermostat connected to 2- 2000 watt baseboard heaters shorted out. The burnt out thermostat only had 2 wires, a black and white. Was it the wrong kind? Was it for a single baseboard heater? I purchased a double line dimplex thermostat to replace it. I have 240 VAC....
I have 3 baseboard heaters to wire. One going to the den and 1 in each bedroom. The bedrooms are back to back and the den is about 8 feet away at the end of the wall that splits the bedrooms. Can I run these all off one 220 breaker? Would I need to use 12/2, 10/2 or 8/2 wire to run them? Would it...
I would like to heat my new garage with electric baseboard heaters. The new garage is 20X24 feet. I would like to use only one 240V #12 2 wire circuit running two heaters at a total of 3800 watts. I plan to use 2 pole 20A breakers and 2c #12 wire. I would like to have both heaters controlled...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
