 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heil furnace questions
What would cause furnace flames to go out and relight several times per cycle while the blower continues the whole cycle? Would having basement vents closed cause this? We have lived here 10 years and never opened the basement vents and this problem hasn't been around except recently.
|
||||
Check out some similar questions!
I have A Heil Furnace that starts up just fine Model #NDG1075DFo1, but after its running for 5 minutes or so it gets another call for heat, fills the gas box with naatural gas and re-lights this mix pretty violently. This may happen a few times during the heating cycle until the thermostat is...
Diagnostic code lo pressue switch open when should be closed on two stage. Only on first heat cycle/lo. Does it need new lo pressure switch? Or simpiliarfix?
Our heil furnace won't stay lit. It goes out after we release the pilot button. Any suggestion?
I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I...
I have bought a house with a furnace and I cannot get the pilot to light. I am asking for some type of manual so I can figure this out. The model is VG-80MD-1 and the serial is H73838067. The house was built in 1977 and I am sure this is the original Thanks for any info
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
