Ask Experts Questions for FREE Help !
Ask
    jrspades1's Avatar
    jrspades1 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 27, 2009, 06:51 PM
    Fix my snowblower
    I am replacing the auger housing because I broke the blade and part of the housing where the blade is attached. I have taken apart all of the screws but I can not get off the pulley wheel where it is attach to the auger
    jrspades1's Avatar
    jrspades1 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Dec 27, 2009, 06:56 PM

    I have a craftman snowblower model #53688150. I am replacing the auger housing. I need to know how to get the pulley wheel off the auger
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Dec 27, 2009, 08:01 PM

    Gee that's better. I'll send you here: Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears PartsDirect | SearsPartsDirect.com where you should be able to get a parts breakdown diagram.

    You may need a puller. If you need further help, post the link of the diagram.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Dec 28, 2009, 06:49 AM

    Hi,
    I found a link to the parts breakdown through OrderTree and the PartSmart Web parts at:
    Ordertree.com)
    And it appears to thread on. No clue as to the direction of the threads by the breakdown.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hole in trunk; to fix or not to fix? [ 1 Answers ]

I have a massive Catalpa (sp) tree in my front yard. The trunk is about 4 feet in diameter at ground level. About 10 feet up the trunk, there is an oblong hole that's about 10" tall by 4" wide. I think squirrels are living in there. While I don't want to harm the squirrels, I don't want to lose...

Snowblower [ 3 Answers ]

826 toro snowblower drive was working now stopped??

How can I fix my snowblower [ 1 Answers ]

I put the wrong mix on the snowblower I have a 2 cycle craftsman gas. I put more oil then gas tried dumping someof the gas out so I can put more in. at first the engine was turning now it won't even start. How can I fix this problem

Can I fix hazardous steps if a contractor is refusing to fix, and threatens to sue? [ 1 Answers ]

I live in central Texas. I hired a landscape contractor to install retaining walls and a patio which included 4 steps in stone. These steps range in size from 6.5" to 9.5" and the tallest is on the top! They are very dangerous. He refuses to do any fixes, and walked off project. At one point in the...

Old snowblower [ 1 Answers ]

I have an old Toro 826 used snowblower that was given to me. I cannot start it. I bought a new spark plug, filled the gas tank, even put a little bit of gas where the spark plug goes. I still can not start it. Can someone please help me?

View more questions Search