 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I am trying to clean a drain in the tub, and cannot get the stopper to "unscrew". It
I am trying to clean a drain in the tub, and cannot get the stopper to "unscrew". It just twirls around without coming out. As per your expanded view above, does the #1 knob need to come apart from the #2 piece? I have never had this much trouble with a drain before.
|
||||
Check out some similar questions!
We paid a Sears repairman to come out when we had a flashing "Clean" light on our dishwasher, A Kenmore Ultra Wash 665.1603 or 1703, and he gave us the diagnostic code (buttons to push on the operating panel) and we have used it again after that, but I cannot find the order of the buttons to push...
I have a Kemore dishwasher Model #665.17019401, the clean light keeps flashing and it will not run. You press normal wash and start and the start button blinks but will not start. The manual says it may be the heater circuit, but that is not a part name I guess it has to do with the hetare...
I have tried resetting the dishwasher and it sounds like its running but its not really cleaning the dishes. Is there something I'm supposed to clean out and how? Thank you anyone for your help. Where can I find a manual for this model?
Hi . . . I'm replacing my old cast iron tub with a whirlpool tub. The old drain was a 1 1/2" brass tube tucked into a 4" cast iron drain pipe (with hub), packed with what might be oakum. The seal was fibrous and waxy when I cleaned out the drain, and that's not MY hair :) What's the best way...
We are replacing an existing tub with a shower And the building architect asked us for a written methodology For the new trap installation. We can not access the apartment below or cut into the concrete Slab. Can we raise the shower bed? And can someone Help to descripe what the plumber would...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
