Ask Experts Questions for FREE Help !
Ask
    wildeye's Avatar
    wildeye Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 26, 2009, 03:20 PM
    Is there a reset switch?
    Had a power failure. My York modular air handler hasn't come back on since. Is there a reset switch, or could it be something else?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Dec 26, 2009, 03:25 PM

    Confirming power supply to the system would be one of, if not the, first things to check after a power failure results in a problem. Got a voltmeter?
    wildeye's Avatar
    wildeye Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 26, 2009, 03:36 PM

    Can get one, but not until tomorrow
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #4

    Dec 26, 2009, 03:42 PM

    In the meantime, check any circuit breakers and/or fuses associated with the system. The primary control board may have a small, automotive-type fuse present.
    Attached Images
       
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #5

    Dec 26, 2009, 03:47 PM

    If furnace was in a call for heat when power went out, excessive heat buildup(due to blower not running, because power was out) could have caused an auxiliary limit to trip. These limits are usually mounted on or near the blower housing. Should be a small red button in between the two wire connectors that can be pushed in to reset.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane Reset Switch [ 1 Answers ]

I have a Trane heating and cooling system... XR80 on the furnace. The system is off and the LED light is of as well. Using the thermostat did not get it to come on and setting fan to "on" did not result in air blowing. I have reset all the circuit breakers. Is there a reset button?

Where is the reset switch for a iceco furnace [ 1 Answers ]

Furnace stopped after we changed the filter. Is there a reset switch

Square d pressure switch reset [ 1 Answers ]

The electrical line from my water well pump control box to the well was cut and we lost all water pressure, repaired line and I still have no water is there a reset on the square d pressure switch. I have power 240 coming out of the control box but not to the well no other cuts in line.

Reset switch on a whirlpool dryer [ 1 Answers ]

Where is the reset switch on a whirlpool dryer?? Ita a semi-pro 10kg 3RAWZ481E MLO

View more questions Search