How to frame walls for a 30"x60" bathtub

Louie Partain Posts: 2, Reputation: 1

New Member

Dec 25, 2009, 01:03 PM

how to frame walls for a 30"x60" bathtub

How to frame walls for a 30"x60" bathtub?

ballengerb1 Posts: 27,378, Reputation: 2280

Home Repair & Remodeling Expert

Dec 26, 2009, 10:01 AM

Is this new or remodel. Is there a shower with this?

Add your answer here.

Check out some similar questions!

"A" frame attic insulation and venting [ 4 Answers ]

I am converting my "A" frame attic into a living space. The joists stick out 5" from the roof and are 22" apart. It's an old house and measurements change give or take a half inch from joist to joist. Even though there is no ridge vent there are roof louvers about 3 ' from the peak. I can only...

Can I "mud" over textured bathroom walls? [ 1 Answers ]

We just purchased a home that is 27 yrs old...with alot of DIY projects it will be beautiful. My question is for the main bathroom. There is some kind of texture on the walls (it looks like popcorn from ceilings), we have tried almost everything to remove the texture and it just will not come off....

Photoshop (Elements) "frame" effect. [ 3 Answers ]

I'm using PE 5.0... trying to find the filter or effect that does this: http://www.kameyhawk.com/xSites/Agents/kameyhawk/Content/UploadedFiles/Kamey_Hawk_Framed_1-1.gif I've googled and searched the Help but coming up empty... maybe cause I don't even know what to call it. Any ideas how I...

How to take "energy balance in diff frame of references" [ 4 Answers ]

Imagine there are only three bodies in the universe 1> A gun 2> A bullet already fired 3> A wooden block which is target of the bullet and is stationary wrt gun before impact with the gun All the three observers associated(stationary) with three bodies will see impact then they should have...