Inlet frozen

Brian MacnEILL Posts: 1, Reputation: 1

New Member

Dec 24, 2009, 11:56 AM

Inlet frozen

Water supply frozen at inlet

mygirlsdad77 Posts: 5,713, Reputation: 339

Plumbing Expert

Dec 24, 2009, 01:09 PM

More info
Type of pipe, location, etc

ballengerb1 Posts: 27,378, Reputation: 2280

Home Repair & Remodeling Expert

Dec 24, 2009, 02:12 PM

Heat

Add your answer here.

Check out some similar questions!

Do I need to replce the inlet valve on my washer? [ 4 Answers ]

Hi, Our washer was leaking at inlet valve, we tried to tighten it.. but we think it might of striped the valve.. We tried plumbers tape, but it still leaked... Do we need to replace the valve, and if so is it easy to do?

Septic inlet connector [ 2 Answers ]

I am trying to connect a waste pipe to a septic tank but the building is on the opposite side of the inlet (just about 180 degrees). From where the waste pipe leaves the toilet to the inlet is less then 10 feet and the drop from toilet to inlet is about 4 feet. How do I do this? What kind of...

Leak under sink from inlet valve [ 2 Answers ]

Hi, I seem to have a slow leak at the water shutoff valve under my kitchen sink. The leak is coming from the part that is used to turn is on and off (sorry don’t know the specific name). The problem is that the pipes running to the shutoff valve are polybutylene. The valve itself is metal...

Toilet water inlet leaks [ 4 Answers ]

The 18" brass tubing on the water inlet has a crack right at the angle stop. Big crack, big leak when the valve is open (no leak when the valve is closed). Can this tube be replaced without solder/welding? This home was built 14 years ago (fixture age). I've heard speedball say there should be...