 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I assume you're referring to a one handled faucet. Shut the water off and open up the faucet and pull the cartridge. The inlet ports are those small holes at the base of the cartridge. To tell you more we will need the brand, age and function of the faucet. Regards, Tom
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Is it safe to connect MIP CPVC directly to the FIP shower inlet? The previous homeowner had done that when finishing the basement. I'm in the process of redoing some of it, but was a bit concerned after a trip to Lowe's. I saw that the MIP CPVC adapter said "cold water" where as the CPVC to...
Hi, I have always had low hot water pressure in my master shower ever since the house was renovated. I have followed the advice on this site, and it is clear that it is a clog in the hot water line. I then decided that it would be brilliant to shove a semi soft plastic homemade snake device down...
I am planning to replace my water inlet valve of my referigrator ice maker. I am confused with the electric connection. The +ve or -ve is not marked on the referigrator side or valve side. Please advice how to find this. Or Is it OK if I connect it anyway? Thanks Sam
The 18" brass tubing on the water inlet has a crack right at the angle stop. Big crack, big leak when the valve is open (no leak when the valve is closed). Can this tube be replaced without solder/welding? This home was built 14 years ago (fixture age). I've heard speedball say there should be...
View more questions Search
|
