Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to remove "stuck" valve stem from shower faucet
[ 6 Answers ]
I have followed instructions for disassembling the faucet in order to replace the washer (to stop dripping). However, after removing the packing nut, I cannot seem to get the valve stem assembly to come out by turning clockwise (also tried the other direction). I tried grip lock pliers, but it...
Faucet stem leaks
[ 3 Answers ]
My house was built in 1952 and the bath tub faucet leaks at the stem and I can't find a replacement for it, can you help.
Replaced Faucet valve stems and shower stem devirter
[ 1 Answers ]
I have recently replaced my faucet valve stems and the shower devirter stem in the bath tub, and now the only thing that water is flowing through is the shower head and not the spot going in the tub. Also the shower devirter only makes a 1/4 turn.
Diverter stem installation - three handle shower & tub faucet
[ 4 Answers ]
The house is well over 25 years of age and I have replaced both hot and cold water valves and tub faucet without removal of bath and shower stall tiles - still look good. Purchased a diverter stem (Galtmaster tub and shower models - 1963 to 65). With the old diverter I would turn clockwise to have...
Remove faucet stem
[ 4 Answers ]
I am trying to repair a leaky faucet in my bathroom sink. I have removed the cap on the handle, removed the screw and pulled off the handle. I am unable to remove the stem. Does anyone have any suggestions? This is a Sayco faucet and could be 20 years old. Thank you. View more questions Search
|