Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Heil Furnace
 [ 10 Answers ]
 I have A Heil Furnace that starts up just fine Model #NDG1075DFo1, but after its running for 5 minutes or so it gets another call for heat, fills the gas box with naatural gas and re-lights this mix pretty violently. This may happen a few times during the heating cycle until the thermostat is... 
Heil furnace
 [ 0 Answers ]
 Diagnostic code lo pressue switch open when should be closed on two stage. Only on first heat cycle/lo. Does it need new lo pressure switch? Or simpiliarfix? 
HEIL furnace
 [ 1 Answers ]
 Our heil furnace won't stay lit. It goes out after we release the pilot button. Any suggestion? 
Heil Furnace-Combustion fan comes on but furnace does not come on
 [ 12 Answers ]
 I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I... 
Heil furnace
 [ 2 Answers ]
 
I have bought a house with a furnace and I cannot get the pilot to light. I am asking for some type of manual so I can figure this out. The model is VG-80MD-1 and the serial is H73838067. The house was built in 1977 and I am sure this is the original Thanks for any info View more questions Search 
  |