Ask Experts Questions for FREE Help !
Ask
    honest1's Avatar
    honest1 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 15, 2009, 10:35 AM
    Can I install a GFI for the cristmas lights?
    Hi I want to have an outlet on the side of my house I guess it should be a GFI is this going to be OK to plug the cristmas lights to this?
    honest1's Avatar
    honest1 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Dec 15, 2009, 10:37 AM

    OK ani
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Dec 15, 2009, 11:28 AM

    Yes. It's desirable as well.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Dec 15, 2009, 03:07 PM
    And required by Code, all outdoor receptacles shall be GFI protected.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tail Lights, Dash and Gear Lights not working (91 Ford Laser) [ 1 Answers ]

Hi, I hope someone here can help. My tail / dash / gear lights are not functioning. My brake and headlights are fine. I have done a little research on a few sites and found out that all 3 are connected to the same fuse, so I checked my fuses. But they look fine (kept reading about how to go...

How to install motion sensors to exsisting recessed lights [ 2 Answers ]

Can anyone help me, I want to install a motion sensor unit to my front porch lights.. which Are recessed lights. I have unscrewed the unit and found there are 3 white cables I see two cables runs directly to the recessed main box while the other one I have no idea I'm guessing that...

Cooking ham for Cristmas [ 4 Answers ]

Hello, I'm very new to this site and still learning my way around. Christmas is coming, I like cooking very much:p. I live in Australia (Gold Coast) and we have very hot summers, I'm serving cold meats and cold seafood for Christsmas Eve dinner. What I would like to find is a great recipe on how...

Fan Install of Existing ceiling lights [ 3 Answers ]

Hello, I have a switch that controls 2 lights in my living room, I would like to install a fan between the lights. Is there any way that I can tap juice off those lights without running another wire to an individual switch. The fan is remote controlled. My fear is that I obviously can't turn...

Generator Install-Lights Flicker [ 4 Answers ]

After generator was installed (Generac Model 0052540 w/Auto Txfer) started to experience whole house "flicker" whenever any appliance turns on... tricky thing is, this happens even when we switch to 100% generator power. Power Co and Electrician have gone over "everything" and come up with...

View more questions Search