Ask Experts Questions for FREE Help !
Ask
    Carter57's Avatar
    Carter57 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2009, 04:57 PM
    How many feet of wire between main breaker and meter base without a disconnect
    What is the code for the length of wire between the panel box and meter base without installing a disconnect
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Dec 12, 2009, 04:08 AM

    I assume you mean unfused and before the main disconnect.

    Inside the house; typically between 0 and ten feet.
    Outside the house; typically unlimited.
    Some places require a disconnect right at the meter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cable to use from meter base to breaker box [ 16 Answers ]

I am moving my current breaker box to the outside of my house. It will sit approimatly 1 foot from my meter base, I will need about 10 feet of cable to make the run (I think). I just need to know what kind of cable I need to use. And if I need to have it in a conduit. I have look in the NEC,...

Wiring a combination meter and main disconnect. [ 1 Answers ]

I bought a Square D CQRA200 Meter/main disconnect combination and I expected to see the neutral isolated from the ground. Does the neutral and ground start from the same block?

Running 2 100 amp breaker boxes on 200 amp meter base [ 1 Answers ]

I have 2 100 amp breaker boxes,but the meter base is 100 amp.Wanting to put 200 amp metet service with disconnect box.Can some one tell me if this is possible.and how you would connect the 2 breaker boxes to the disconnect box.Thank you

Meter Base with disconnect and A/C Breakers [ 3 Answers ]

My meter base will have an outside 200amp disconnect. It will also have three 30amp breakers to feed the A/C units located a few feet from the meter. There will also be a 200amp main panel located in the basement. My question is if my disconnect outside is a 200amp and I have three 30amp...

Main breaker and main disconnect [ 2 Answers ]

What I have is a home built in 1960 moved in 2 years it had a meter hanging from the rear of house with no main, 240v 50amp circuit to stove, 240 30amp to dryer, 5 breakers for the rest of house 1 20amp and 4 15amp. What my plan is to replace the meter housing and put a g.e. 200amp Disconnect on...

View more questions Search