Ask Experts Questions for FREE Help !
Ask
    leo m's Avatar
    leo m Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2009, 08:37 AM
    What size fuse should I use in my disconnect for a 27 amp draw on a motor
    I am running a piece of equipment that draws 27 amps which is on the nameplate of the motor but keep blowing 30 amp fuses . What size fuse should I have to protect this motor. Can I upgrade the fuse for say 35 amps.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Dec 11, 2009, 01:53 PM
    If your located in the USA, need to know if the motor is single or three phase, and horespower.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I size an Electirc Heat Circuit and Fuse [ 2 Answers ]

Hi cindy here We have and old fuse panel. And we want to hook up baseboard heaters. What size fuse would we use in the box.:confused:

A/C compressor trips fuse in disconnect? [ 5 Answers ]

I am new to this site and in need of all of your help. My AC was running fine on Saturday and most of the day on Sunday, then Sunday night I noticed that the air coming from the vents was not as cool as it had been earlier. I walked outside and my compressor unit was off. I reset the circuit...

How to find the right size fuse [ 1 Answers ]

I have 240v circuit and a solenoid that I want to know what size fuse should I use.

How to determine which fuse size I need? [ 2 Answers ]

I've just installed power door locks in my Honda Civic, and I've placed a fuse holder along the wire that goes from + terminal to the door lock relay. First of all, should it be on the + side of the battery or the - side? More important question is, how do I determine the fuse size that I...

View more questions Search