Ask Experts Questions for FREE Help !
Ask
    brandonstephens's Avatar
    brandonstephens Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 6, 2009, 07:26 PM
    Pilot won't light
    Just changed the thermostat. Turned power back on and pilot will not light.
    brandonstephens's Avatar
    brandonstephens Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Dec 6, 2009, 07:28 PM
    Pilot won't light
    I just changed my thermostat. After turning the power supply back on and turning on the unit, I discovered that the pilot is not lit. The blower comes on and the burners click like they are about to come on, but there is no pilot to light them. How do I get the pilot back on?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Dec 7, 2009, 12:26 AM
    Put the old thermostat back on and see if it works. If it does then you know you have a thermostat wiring or thermostat problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pilot light on our Lennox G40UH(X) Series furnace won't light [ 24 Answers ]

The pilot light on our Lennox G40UH(X) Series furnace won't light. We went through the steps to restart the furance. The blower turns on for a few minutes but blows cold air and the pilot light never comes on. How can I fix this?

Propane Furnace won't start no pilot light red light flashes 3 times [ 6 Answers ]

My propane furnace G6RC has no visible flame and the red light either stays on or flashes 3 times in a row and then the furnace shuts off and tries to restart

Does putting gas hot water heater dial on PILOT put pilot light out? [ 5 Answers ]

My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...

Intermittent pilot light burns well but main burners do not light [ 1 Answers ]

I have an Olson furnace with intermittent pilot light with electronic spark ignition. There is a Honeywell S8610U furnace controller. When thermostat calls for heat the ignitor sparks and the pilot flame lights. The flame continues to burn while the ignitor continues to spark for about 5+...

Pilot light stays on but pilot switch keeps resetting [ 5 Answers ]

I have a baso L62AA-5 pilot switch and it used to keep resetting. I would hold the switch down for a good minute and the gas lights, but after a half an hour or so it would go back to its reset position. The standing pilot light was always on and never a problem. After a few days of manually...

View more questions Search