Ask Experts Questions for FREE Help !
Ask
    Rob P's Avatar
    Rob P Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2009, 11:36 PM
    60 A Sub Panel
    I have about a 25 foot run from my Main Circuit box. I would like to run a sub panel in the garage for a fish room. Is it OK to run the feed from the Main to the Sub through some kind of conduit secured to an outside wall?
    freebird197088's Avatar
    freebird197088 Posts: 6, Reputation: 1
    New Member
    		  
    #2

    Dec 3, 2009, 12:21 AM

    Yes.
    Rob P's Avatar
    Rob P Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 3, 2009, 07:32 PM
    Quote Originally Posted by freebird197088 View Post
    yes.
    Thank you! Can get to work on this run tomorrow.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Updating service panel to 200 amp with feeder to 100 amp panel in old house [ 8 Answers ]

I currently in the process of converting 1000 sq ft of attached garage into living space while doing this we are updating electrical service to 200 amp new service, there is 100 amp service in the old part of the house which will remain but need to be sub paneled from the new 200 amp service. I...

200 amp panel feeding a 100 amp panel roughly 130' away [ 7 Answers ]

Hi all, We are building a apartment above the garage,my question is what size wire do I need to run from the 200 amp panel to the 100 amp panel roughly 130' away? I want to use aluminum wire as I think copper would be to costly. Thanks for your help in advance, Dude :eek:

Interior 4 panel doors separating at panel joint [ 1 Answers ]

I had my entire interior house repainted last fall. All the doors, which are wood 4 panel very good quality are all separating where the sunken panel meets the wood around the door. Not sure I am explaining this correctly but I hope someone gets the picture... The doors have been in this house...

Wiring from my house panel to my pole barn panel [ 1 Answers ]

I am going to be wiring my pole barn up soon and just need some help on the type of wire to use. In my house I have a 200 AMP service and plan on running a 100 AMP feeder from that panel to my subpanel in the barn. (Just under 100 Feet) I am going to run a 6 gauge ground, two 4 gauge...

Breaker size in main panel to support sub panel? [ 7 Answers ]

Hello, I am wiring a sub-panel to the outside of my home (50 feet from main 200 amp box). I ran 3 wire - 6 gauge. What is the largest 2 pole breaker I can put in the main panel to supply the sub-panel. TYPE NM-B 6-3 WITH GROUND 600 VOLTS CIRTEX-I EZ-STRIP (R) PLUS 17:11 2/5/07 SB/RC ...

View more questions Search