Ask Experts Questions for FREE Help !
Ask
    aqrose's Avatar
    aqrose Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 29, 2009, 04:41 PM
    GE DBL333EAOWW won't start
    I have a GE DBL333EAOWW electric dryer that won't start. It just makes a humming sound when I try to start it. Is this a broken starter & how much should I expect to pay to replace it if it is?
    Thanks in advance! :)
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
     
    #2

    Nov 29, 2009, 05:17 PM

    Does the humming continue until the door is opened? Does the dryer get warm, like it is drying clothes?

    If so, it might just be a broken belt. You can take the back off and look, but if that is too intimidating, a reputable service man can easily replace the belt, if that is indeed the problem. The advantage of doing it yourself is that it is free! Belts do break, and that would mean most likely all the expensive parts are still okay.

    If it is something else, it might not be cost-effective to repair. Until you know what is actually wrong with it, any guess is just a guess.

    There is really not a "starter" in an electric dryer. The major parts are:
    1. Motor (expensive)
    2. Timer (also expensive, not quite as much)
    3. Belt
    4. Pulley
    5. Drum (where the clothes go)
      Not much to go wrong with this :)

    Best of luck,
    WallyH

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dryer won't start when I push the start button [ 1 Answers ]

Kenmore dryer won't start when I push the start button

Kenmore dryer won't start could be start button or timer [ 1 Answers ]

Please help me with this. My dryer was working good and now it won't start at all.

No HSI start GMNT Goodman Janitrol No flame start [ 1 Answers ]

I have a Janitrol (Goodman) furnace, and the controller board indicates 3 blinks. The flame blower starts, but it never gets to HSI (the ignitor never starts heating up). I've changed the controller board, and same issues. I've been through every sensor (bypassing all of them), and still no...

Lawn mower won't start , changed Plug , but Still won't Start [ 2 Answers ]

My lawn mower won't Start , I tried Changing the Plug , But still won't Start

Can't start my Poulan chainsaw. Start rope too hard to pull. [ 1 Answers ]

Can't start my chainsaw because the start rope is too hard to pull out. Pulling the rope causes a jerky action.


View more questions Search