Ask Experts Questions for FREE Help !
Ask
    francoalex's Avatar
    francoalex Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2009, 01:10 PM
    Jumper on thermostats
    I installed a thermostat for an gas furnace. The thermostat has the option of Gas or electric furnace. The selector jumper ( a black rubber like thing) need to be covering the electric or gas option?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Nov 29, 2009, 02:20 PM
    I hope someone comes along soon that can understand what you are saying/asking
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to jumper thermostats [ 2 Answers ]

To jump to call for heat the connection are red(24v) green(fan) orange (rev. valve) white w1(heat,2nd) brown w2(heat 3rd) yellow(cool) blue (common) whitch two is the jump

How to jumper thermostats [ 1 Answers ]

To jump to call for heat the connection are red(24v) green(fan) orange (rev. valve) white w1(heat,2nd) brown w2(heat 3rd) yellow(cool) blue (common) whitch two is the jump

Noma 5+1+1 thermostat - jumper? [ 1 Answers ]

I just purchased a Noma 5+1+1 heating/cooling programmable thermostat to replace the one that came with my new home. I have a furnace and an A/C unit. The wiring on the old one is as follows: Green wire > G Orange wire > Y White wire > W Red wire > RC jumped to RH The new thermostat has...

Identifying jumper pin [ 3 Answers ]

Someone posted that their floppy drive was recognized but when trying to use, it says to insert floppy. I have the same problem and it was suggested to "remove CMOS jumper pin from Motherboard. I've never done this. Can someone please tell me where this is located or where an image might be...

View more questions Search