Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton Bay ceiling fan light fixture stopped working but fan still works why?
[ 14 Answers ]
New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:
Hampton bay ceiling fan lights & fan not operating
[ 17 Answers ]
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
Hampton Bay Remote Ceiling Fan - light works - no fan
[ 2 Answers ]
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Hampton Bay Mediterranean FAn
[ 8 Answers ]
I have tried a number of ways to fit the remote fan receiver into the canopy but have been unsuccessful. Any ideas? I looked at the diagram and it shows the receiver oriented with flat side up. Despite my efforts, I just can't seem to make it fit.
Hampton Bay Mediterranean Fan
[ 3 Answers ]
Just purchased a 52 Hampton Bay Mediterranean type cailing fan with remote control for installation above a staircase to replace a lamp. After installing it according to the manual I realized I cannot use it in my 2 way application. The fan needs to stay on separately from the lamp, which is what... View more questions Search
|