 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
The only way to adjust a pilot is if there is a pilot adjustment screw on the gas vavle. If adjusting this screw(if there is one) doesn't help, your next step would be to remove the pilot oriface and clean it, as they plug easily. Good luck and let me know how things work out. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Rheem model rgld-1one-jr, ignitor model sp715-us17-15u. The pilot will stay lite but will not lite the gas in the gas chambers. Yesterday I turned everything off all night gas valve and t-stat when I got up ithought I would turn it on and listen for a while. So the pilot lights and the gas was...
The pilot light on our State Censible gas water heater will not stay lit... it is not the thermacouple and it is protected from drafts. We light it daily... we get enough hot water for about 2 showers and a load of dishes. What could be causing this problem?
Hi, I have a lennox gas based fire place, the pilot is staying on but when I switch the unit on from the wall switch, it does not turn on. Any idea how to fix it ? Thanks
My gas fireplace was working fine and then it turned off and the pilot is out. We don't know what happened or how to get it started again. Any help would be greatly appreciated. Of course, I can't find the paperwork that came with unit at this time. Unit runs on natural gas which runs under our...
The pilot light on my gas fireplace is too high I think. How do you adjust the pilot light?
View more questions Search
|
