Ask Experts Questions for FREE Help !
Ask
    kidzkrnr's Avatar
    kidzkrnr Posts: 4, Reputation: 1
    New Member
     
    #1

    Nov 25, 2009, 09:55 AM
    Replace copper pipe with flex tubing
    I am trying to replace the old faucet on my kitchen sink and thought I was turning the nuts correctly but realized I was just twisting the copper line above the nuts. I can't get the nuts loose and now what do I do. I really need to get this done today! Help please!
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Nov 25, 2009, 10:03 AM
    Did you use two wrenches or a pair of pliers here.. You should be.

    Put one plier on the nut and the other plier at the built up neck of the supply of the shutoff and then loosen in the correct direction.

    Let me know more...

    MARK
    kidzkrnr's Avatar
    kidzkrnr Posts: 4, Reputation: 1
    New Member
     
    #3

    Nov 25, 2009, 10:08 AM

    I can't get the nuts to turn. What now?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #4

    Nov 25, 2009, 10:25 AM
    Let's back up...

    Are you trying to loosen a copper supply tube from a faucet on one end and a shutoff on the other end?
    kidzkrnr's Avatar
    kidzkrnr Posts: 4, Reputation: 1
    New Member
     
    #5

    Nov 25, 2009, 10:28 AM

    Not sure I know what you mean. There are two spots where there are connections. One is at the connection to the supply line that goes to the basement where the shut off valve is. The other is closer to the faucet. Which should I be loosening?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #6

    Nov 25, 2009, 10:32 AM
    If you are trying to replace the faucet then the top nuts can just be twisted off and/or broken off... all will be replaced when you install a new faucet and new FLEXIBLE CONNECTORS.

    To save the shutoff and the threads at the shutoff, take two pliers and put one on the shutoff to hold against yourself and take the other and loosen the nut on the old supply. It should come loose with some persuasion.

    Install the faucet and install new flexible connectors to connect all this back up.

    MARK
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replace copper with flex-tubing under k-sink, replace faucet [ 13 Answers ]

I need a new faucet in the kitchen. Old lines are copper and sweated in. Can a novice do-it-yourselfer change the copper lines to flex-steel, and put in a new faucet, or do we need a plumber? We are willing to learn.. Where can I find detailed information on how to do it? Step by step?

How to join copper tubing to iron pipe [ 4 Answers ]

I have gas/hot water heating system with radiators. I want to replace the iron pipe mains with copper tubing and adapt to the iron risers going up to the radiators. Is there a fitting to adapt unthreaded iron pipe to copper?

Iron pipe vs copper tubing for gas lines, cost [ 2 Answers ]

We want to have a dryer connected in a new area of the house. One Plumber told us it must now be steel pipe with threaded couplings--cannot be copper tubing. Is this valid? Why? What should it cost to run about 60 ft of connection line?

A/C not cooling, Small Copper pipe COLD and Large Copper pipe room temp. [ 4 Answers ]

I just moved into a newly constructed townhome and the a/c units are of course new. The A/c is not cooling at all. The machine inside turns on as well as the one outside. The inside A/C makes a strange sucking sound kind of like if you were sipping something out of a cup with a straw and you ran...

Fixed PB tubing/copper pipe union [ 1 Answers ]

Re Polybutylene tubing, threaded transition union. Thx speedball for your help. I have cut out 4" of the leaking union and replaced it with 2 5/8" compression unions attached to a 4" 1/2" copper pipe. The PB tubing also incorporated a copper insert with the compression fitting. I know you...


View more questions Search