 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intertherm Tstat
I bought a double wide and not being to familiar with the heat/ac unit I would like to know what the setting mean on the INTERTHERM thermostat.
EM HEAT, HEAT, OFF, COOL, FAN, AUTO, ON, EM HEAT, AUX HEAT That is how the settings read left to right, the last two being indicator lights. What's the difference between EM HEAT and HEAT and AUX HEAT? Bill |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
This is an older furnace.It works fine sometimes! I raised the tstat and nothing happened, I pushed the fan switch from auto to on and it worked-back to auto and it didn't work. When I checked the breakers and flipped them off and back on the blower started.Any idea where the problem may be? ...
If You Take The Cover Off The Heater There Is A Small Black Switch That Says Fan Off On. What Should This Be On. If It Is Off The Heater Will Not Blow Or Light Or Anything. If It Is On It Makes A Constant Low Buzzing Sound But The Heater Will Come On And Heat Should It Make This Sound.. THE FAN...
I bought a low voltage thermostat to work with my electric baseboard heat. It is a low voltage system with two transformers that I can see in my crawlspace. Is low voltage the same as millivolt or do I need to make sure which I have and which the tstat works with? I've got two wires coming to...
I am replacing a Robertshaw 9520 TSTAT with a Carrier TSTATCCREC01. The current wiring on 9520 goes to these terminals. W2 has only a jumper. R, Y1, O, G, E, C, And a jumper from W2 to E. The carrier terminals are as follows:
I am putting in a honeywell tstat TH8110U, and have two wires coming out the wall (white and black). Is the white the heat relay?
View more questions Search
|
