Ask Experts Questions for FREE Help !
Ask
    brookseap's Avatar
    brookseap Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 22, 2009, 01:03 PM
    Convert a heil furnace from nat to lp?
    I want to know if there is a way to convert a 1983 hiel furnace to lp gas that is currently nat gas.And if I even need to do anything?I did see some parts that are $200 valve assemble?Can I just rpl cheaper and smaller parts in the vlv?Ita a old funace and would hate to put $200 buck and it not work.Any suggestions? Thanks Mike in Colorado.I will be using this for my garage.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Nov 22, 2009, 01:15 PM
    Changing from natgas to LP requires more than just connecting the new gas supply. Provide complete model# of unit to allow data look-up.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil Furnace [ 10 Answers ]

I have A Heil Furnace that starts up just fine Model #NDG1075DFo1, but after its running for 5 minutes or so it gets another call for heat, fills the gas box with naatural gas and re-lights this mix pretty violently. This may happen a few times during the heating cycle until the thermostat is...

HEIL furnace [ 1 Answers ]

Our heil furnace won't stay lit. It goes out after we release the pilot button. Any suggestion?

Heil Furnace-Combustion fan comes on but furnace does not come on [ 12 Answers ]

I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I...

Add a fan only relay to my Heil LP furnace [ 3 Answers ]

I am adding an hydronic heat coil to my heil high efficiency furnace. I'm installing a 24volt relay wich I already have. I need to know how to wire this up. The furnace is a 1995 model. My objective is to run the fan on thermostat switch,and keep the LP heat for a back-up. Thanks

Heil furnace [ 2 Answers ]

I have bought a house with a furnace and I cannot get the pilot to light. I am asking for some type of manual so I can figure this out. The model is VG-80MD-1 and the serial is H73838067. The house was built in 1977 and I am sure this is the original Thanks for any info

View more questions Search