Ask Experts Questions for FREE Help !
Ask
    littleladybug's Avatar
    littleladybug Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2009, 11:27 AM
    3-speed fan switch
    Wires were take off before by someone that lived here be4 so I want 2 fix the fan and I don't know where the wiers go and the packaging doesn't have it and I don't want 2 mess yhe fan up.:)
    littleladybug's Avatar
    littleladybug Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Nov 20, 2009, 11:32 AM
    Forgot it is a westinghouse 77020 switch
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Nov 26, 2009, 09:12 PM

    What make is the fan, what color wires do you have?

    Ceiling fan pullchain replacement and repair - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where can I find a switch for a 4 blade ceiling fan kte model 308? [ 3 Answers ]

I need a switch for a 4 blade ceiling fan.

How do I fix my ceiling fan switch? [ 5 Answers ]

Hi, new to this site... I bought a Hunter ceiling fan from the depot and installed it and it worked fine until one of the kids snapped the chain off in the switch and it was stuck on low. I went and bought a new 4-wire switch for it and installed it. Now when I plug my switch housing into the fan...

Wiring a bathroom fan/light and new switch [ 3 Answers ]

I am installing a new bathroom fan/light and switch in place of the old ones. They work okay but they're not very eye-appealing. I have the new parts and I figured, the new setup would be the same as the old. By the way, the old switch controlled the fan and light separately. I want the new switch...

Hooking up a solid state speed control for my ceiling fan [ 1 Answers ]

I have an ellington ceiling fan that is currently turned on and off via a wall mounted light switch I purchased a solid state speed control, but can't figure how to hook it up. a:)ppreciate help.

Constant fan on low speed [ 4 Answers ]

My neighbour has a clare brothers furnace. Model HEMI 70BD. I replaced the module for them because it was shot. The furnace fan now runs on low speed all the time and during the call for heat then goes into high. T-stat is about 18yrs old. Mercury switch. The humidifier and EAC are wired together...

View more questions Search