Ask Experts Questions for FREE Help !
Ask
    emadzaki's Avatar
    emadzaki Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 18, 2009, 08:22 AM
    Chilled water pump
    I’m just asking for the differences between end suction pump and end suction split case for chilled water pump and which one is better
    emadzaki's Avatar
    emadzaki Posts: 2, Reputation: 1
    New Member
     
    #2

    Nov 18, 2009, 08:29 AM

    I'm just asking for the differences between end suction pump and end suction split case for chilled water pump and which one is better

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Chilled water pump for HVAC [ 15 Answers ]

Kindly let me know what pump I should use for a chilled water close loop system where required flow rate is 102 m3/hr and the max. hight of building is 100 ft.

Chilled water pump [ 4 Answers ]

How do I size the water pump for chiller

Chilled water pump [ 2 Answers ]

I have 4 chiller each capacity 105 tons and connected with old 3pumps each has 15 hp capacity.iwant change this pump by more capacity and enough to operate 4 chiller because I add one chiller extrrra

Chilled water pumps [ 2 Answers ]

How I can select the pump after I get the flow required and the head I have a closed loop system chillers in ground level and 35 floors height Are 4 bars enough to start the system which is the head that I calaculated? What is system pressure then? Do I have to add the vertical height also to...


View more questions Search