Ask Experts Questions for FREE Help !
Ask
    mtconc's Avatar
    mtconc Posts: 119, Reputation: 9
    Junior Member
    		  
    #1

    Nov 17, 2009, 08:08 AM
    Direct drive 10" tablesaw
    I have a 10" sears tablesaw that is about +/- 5 years old.it ran fine until I used it yesterday,turned it off and it sounded like it stopped very slowly. I noticed it ,checked the blade,saw it was loose and tighted it. I thought that would fix it but now it shakes like a bearing is loose?not sure what it is... any help would be great... thanks in advance
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Nov 17, 2009, 11:35 AM

    Hi,
    Would say the blade was not centered before tightening.
    Peace,
    Clarke
    mtconc's Avatar
    mtconc Posts: 119, Reputation: 9
    Junior Member
    		  
    #3

    Nov 17, 2009, 02:10 PM

    I checked the blade.. that's not it...
    I took the top off to access the motor.. took the shaft of and saw the metal filings inside the worn gear :(.. can I get a new gear or is it easier to get a new saw?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Nov 17, 2009, 04:37 PM

    Hi,
    Find the model number tag and look it up at:
    Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears PartsDirect | SearsPartsDirect.com
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Direct TV error message "check signal cable" [ 1 Answers ]

Hi We had a power outage last night and when the power came back on, 2 of our 3 tvs were fine, but the 3rd isn't. When we turn it on we get a black screen with a blue box that says "check signal cable". I called Direct TV and they were no help! Thank you!

Is there a manual for a 4" craftsman tablesaw model # 572-2474 out there? [ 1 Answers ]

I have acquired a 4" craftsman table saw model # 572-2474 and it is in excellent shape with all accessories but a manual and I am in need of the belt. I want to use it for small craft projects. I have ran this information through Google many times and many ways and can't find anything about it....

Direct Drive or Belt Driven [ 1 Answers ]

I have a Kenmore 80 Series Washer model #110 20872 990. I need to know if it is belt driven or direct drive,

View more questions Search