Ask Experts Questions for FREE Help !
Ask
    sarah1004's Avatar
    sarah1004 Posts: 107, Reputation: 1
    Junior Member
     
    #1

    Nov 16, 2009, 10:15 PM
    How to find absorbed by the calorimeter?
    Temperature of colder water : 23C
    Temperature of warmer water : 66C
    Final temp of water after mixing : 42C
    Heat lost by the warmer water : -5020.8J ,(209.2)(42-66)
    Heat gained by colder water : 3974.8J ,(209.2)(42-23)
    Heat absorbed by the calorimeter:??
    Heat Capacity, C, of calorimeter :??

    I really really cannot find these two answers...
    I think this experimental was easy but calculation parts are so hard and confusing.

    Please Please help me.. I really cannot do these two questions..

    Thanks
    Unknown008's Avatar
    Unknown008 Posts: 8,076, Reputation: 723
    Uber Member
     
    #2

    Nov 17, 2009, 05:49 AM

    From the principle of conservation of energy, heat gain should equal to the magnitude of heat lost.

    Heat gained = 3974.8 J
    Heat lost = 5020.8 J

    Since there is a difference, that difference has got into the calorimeter.

    So, heat dissipated to calorimeter = 5020.8 - 3974.8 =1046 J

    Now, heat capacity is given by:



    Q is the amount of energy
    Theta is the change in temperature of the calorimeter.

    Can you finish that now?
    sarah1004's Avatar
    sarah1004 Posts: 107, Reputation: 1
    Junior Member
     
    #3

    Nov 17, 2009, 09:45 PM
    So heat absorbed by the calorimeter is 1046J
    correct?
    heat dissipated to calorimeter = 5020.8 - 3974.8 =1046 J
    And how can I find Q is the amount of energy
    Theta is the change in temperature of the calorimeter.

    Thanks
    Unknown008's Avatar
    Unknown008 Posts: 8,076, Reputation: 723
    Uber Member
     
    #4

    Nov 18, 2009, 05:45 AM

    Q here is exactly equal to 1046 J.

    The energy dissipated from the mixture to the calorimeter is that amount of energy, assuming no other heat loss occurs.

    The temperature change depends on your experiment. What was the initial temperature of the calorimeter? It's final temperature? Assuming that the temperature of the calorimeter is the same as that of the mixture, you can find it. :)
    jamesgeorgereid's Avatar
    jamesgeorgereid Posts: 1, Reputation: 1
    New Member
     
    #5

    Apr 7, 2012, 09:05 PM
    Help! I am trying to find the amount of enegy gained by my homemade calometer, but it just doesn't make sense. If the temperature changed from 2.6 to 3.6 that is one degree. It then says I should multiply that by the mass of the oil- 145 g for my answer, but I know the marshmellow only has 25 cals.
    Things are not adding up, I must be doing something wrong.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I find the enthalpy change in a calorimeter? [ 1 Answers ]

A calorimeter contains 30.0 mL of water at 12.0 C. When 1.60 g of X (a substance with a molar mass of 45.0 g/mol) is added, it dissolves via the reaction X (s) + H2O (l) → X (aq) and the temperature of the solution increases to 28.5 C. Calculate the enthalpy change, Delta H, for this...

Heat capacity of a calorimeter [ 4 Answers ]

Assume you are performing the calibration step of Experiment 8 and you begin with 50 g of water at 20 C and 50 g of water at 80 C. After adding the two portions of water into your calorimeter setup and following the procedure outlined in the experiment, you determine the temperature of the mixed...


View more questions Search