Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Converting RF Fan Controls to Hard Wired Wall Switch?
[ 12 Answers ]
I just brought a Hunter Fan model 21871 at Home Depot. I'm new to ceiling fans, but I do have a moderate amount of residential electric and electronic install knowledge. I picked this fan after looking online and at Lowe's and Home Depot because it was the only one that I liked the look of for a...
Converting remote control ceiling fan to 3-speed wall switch
[ 1 Answers ]
Customer has ceiling fan which is only remote control. We want to wire a wall 3-speed wall switch instead of the remote. The fan unit only has intrernal wiring for the remote use. It has 4 wires going to the motor for speed control. How do I connect these wires to a single incoming hot wire...
Connect a port on a remote switch to a secure segment on the local switch
[ 4 Answers ]
I have 2 Netvanta 1224R switches. On the main switch I have 3 Vlans setup. Vlan1 = main network (example IP 123.231.5.1) Vlan2 = Web Access (Example IP 69.115.851.202) Vlan3 = Secure segment (Example IP 123.231.8.1) On the remote switch I have 1 Vlan. Vlan1 = Main network (example IP...
Converting pull switch lights to wall switch
[ 3 Answers ]
I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the... View more questions Search
|