 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heil ncc5125bkb2 Will not come on-it's cold here!
Heil ncc5125bkb2 gas furnace. After initial ignition when turning on the furnace, if the furnace is turned off, it will not come back on. It is functional when on, blowing hot air, etc. It's going to be 39 tonight... does anyone have any ideas?
:eek: |
||||
Check out some similar questions!
I have a natural gas furnace made by Heil. The model number is NTC6075FBA1. The serial number is L984120332. A few times over the past year, I've noticed the furnace blowing cold air constantly. I "solved" the problem by shutting off the furnace via the circuit breaker, and then turning it on...
I have a Heil furnace #NUGK075DG01, after the gas was cut off the furnace blows only cold air. It has an electronic pilot, so isn't it going to restart itself when the heat gets called for?
I have a Heil Model MULK125DK03 furnace. It works fine for AC and for heat as long as the outdoor temp is above 20 degrees. When it gets cold, especially when the temp is dropping the furnace intermittantly starts, gets to main flame and locks out with the ID fan running and nothing else. I come...
I've recently had a new bathroom put in, with a mains shower (used to be electric). But now my shower keeps running hot-cold-hot-cold every minute or so. My bath tap and sink tap in the bathroom are running fine, it's just the shower. I was told this shouldn't happen as I have a combi-boiler but...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
