Ask Experts Questions for FREE Help !
Ask
    steaden's Avatar
    steaden Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2009, 07:25 PM
    clutch will not engage on murray mod.425001x8b riding lawnmower
    I have a Murray mod. 425001x8b riding lawnmower. I checked to make sure belt was attached to pulley. Does anyone know were tension spring is located and how to adjust this. I This might be the problem. Thanks Steve
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Nov 1, 2009, 08:41 PM

    Hi,
    It would be item #21 on page 8 of the breakdown at the end of this link:
    http://www.outdoordistributors.com/p...PARTS-LIST.pdf
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray 12hp Riding Mower Transmission Won't Engage [ 6 Answers ]

I have a Murray / Tecumseh 12hp ovxl120-202046d that suddenly is no longer engaging in any gear. Also, the brake no longer appears to be working. I can put the mower in gear, engage the parking brake and the mower will roll as if nothing is engaged. The mower will start properly, I can engage...

Murray riding lawnmower turns off when clutch not engaged [ 1 Answers ]

:confused: I have a 2004 Murray 15.5 HP B&S (Cast iron sleeve). It turns over and the engine will run, but as soon as I disengage the clutch in any gear or in neutral the engine turns off. Any help would be appreciated.

Clutch Spring on Murray Riding Mower [ 1 Answers ]

Can anyone tell me where to find a diagram for replacing the clutch spring on a murray riding mower model # 40620c

Electric Clutch on riding lawnmower [ 1 Answers ]

I am having trouble with the electric clutch that engages the blades on my riding lawnmower. Sometimes, when I disengage the blades, the clutch spins completely around and rips out the wires to the clutch. Sometimes it even breaks the wires and it is happening more often now. Other than that, the...

About murray riding lawnmower [ 5 Answers ]

How do I test the safety switch or bypass it to see if that is what it is.Why would it crank while sitting on it ,but know matter what gear it is in(even neutral) it cuts off ,but if you push in clutch/brake quickly it will stay cranked ?

View more questions Search