Ask Experts Questions for FREE Help !
Ask
    allis's Avatar
    allis Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2008, 11:58 AM
    Electric Clutch on riding lawnmower
    I am having trouble with the electric clutch that engages the blades on my riding lawnmower. Sometimes, when I disengage the blades, the clutch spins completely around and rips out the wires to the clutch. Sometimes it even breaks the wires and it is happening more often now. Other than that, the clutch works fine. What is the problem and how can I fix it?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Mar 5, 2008, 05:56 PM
    The clutch housing is either worn, or the pin that goes in the hole that holds the clutch in place is broken, worn, or missing.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman lawnmower pto clutch switch [ 2 Answers ]

I have a Craftsman DYT 4000 rider. When the electric clutch switch is pulled the engine dies. I disconnected the wiring at the clutch and started the mower which ran fine even when I pulled the switch. I thought I would use my volt meter to check voltage but when I connected the two leads to...

Electric Clutch Removal [ 3 Answers ]

I have a Sears 26HP lawn tractor. I'm trying to remove the electric clutch assemble from the engine shaft. However, I do see a hole where I can insert a screwdriver or such to keep the entire shaft from turning when I try to remove the shaft nut. Does anybody have any idea how to get this thing...

Removal of electric clutch [ 1 Answers ]

I am trying to remove the electric clutch from a troybilt lwan tractor. I can't get it off. Do I need a gear puller or shoulld it drop off when center bolt is removed

Craftsman Riding Mower - Spring Clutch [ 1 Answers ]

We have a Craftsman Riding Lawn Mower. The clutch will not engage and when we looked under, "Spring Return Clutch" had fallen off. The manual shows it but does not show where to hook the 2 ends. Can anyone help?

Huskee riding mower clutch issue? [ 10 Answers ]

I have a newer (2005) Huskee riding mower with 50" cutting deck. Mower was working fine, then suddenly the blades stopped cutting and pulleys stopped turning. Now I cannot get the clutch to engage at all. Do I need to replace the clutch? And is this something I can do myself?

View more questions Search