Ask Experts Questions for FREE Help !
Ask
    gotitans's Avatar
    gotitans Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2009, 09:35 AM
    Rheem gas furnace won't stay on
    I have a Rheem 3 ton H&A unit that 90% of the time will world great for a few minutes and then the gas shuts off and the fan continues to run. 10% of time it will heat properly until the thermostat shuts it off. The unit has two switches. One is a thermal type switch and the other a small button type(popper) switch. Do you have suggestions of how to check the problem?
    Thanks
    Gotitans
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Nov 1, 2009, 09:38 AM

    Soulds like you may have a limit problem. How is your air filter?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rheem heater won't stay on [ 0 Answers ]

My Rheem Criterion II model RCBA (or RC8A) - n37656617 or 3765GG17 won't stay on. The fan comes on, the thing that heats up gets red, the big flames come on, then the thing that heats up fades and the big flames go out. Hope this isn't too technical for you to understand. Anyone Help! ...

Rheem gas furnace [ 5 Answers ]

I have an older Rheem gas furnace with badly burnt wiring and needing to rewire. I need a wiring diagram

Rheem oil furnace [ 1 Answers ]

My Rheem oil furnace will not start, Ignite, I had the tank filled, replaced the filter. And then bled the line. I have pushed the reset button several times, the pump will run for several seconds then quit. Anyone have any Ideas?? Kind regards guide

I have a rheem furnace, new motor, I'm getting faint heat, burners won't stay lit [ 2 Answers ]

I have a new motor, thermostat is only a year and a half old, heat comes on, burners won't stay lit. Getting faint heat from vents on first floor level of house

Rheem 90 plus furnace [ 1 Answers ]

Installed in 2004. Just before the fan comes on the furnace bangs/clunks - sound like someone hitting pipes with a wrench. We have had trouble with ignition. Could this be related? If not, any answers?

View more questions Search