Ask Experts Questions for FREE Help !
Ask
    OVATION2009's Avatar
    OVATION2009 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 29, 2009, 08:35 PM
    Thermostat not working on heat
    Thermostat does not work when it is switch from cold to heat. I sat it up to 90 on the upper part but I do not feel the heat all night. The lower setting was on 68. Was working good for summer but now there is no heat even at 90 degrees.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 29, 2009, 08:57 PM
    Did you ever think that the thermostat is not the problem but that the furnace is broken?
    KUXJ's Avatar
    KUXJ Posts: 975, Reputation: 97
    Senior Member
    		  
    #3

    Oct 29, 2009, 08:58 PM
    Hi! OVATION2009, welcome to AMHD :)
    Quote Originally Posted by OVATION2009 View Post
    thermostat does not work when it is switch from cold to heat. i sat it up to 90 on the upper part but i do not feel the heat all night. the lower setting was on 68. was working good for summer but now there is no heat even at 90 degrees.
    What type of heat do you have?
    Oil, Hot air, Gas, Electric?

    What type thermostat? Programmable? Does it have batteries?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

New Honeywell Thermostat for Heat Pump and Gas Furnace - not working [ 5 Answers ]

We recently bought a Honeywell RTH7400 for our home with a Goodman cple30-1 Heat pump and a Janitrol Gas furnace. I hooked it up according to the Honeywell instructions. C to C G to G Y to Y O to O/B R to RC with jumper to R W2 to Aux with jumper to E I set it to 7 on function 170...

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Heat and Air not working on Attic unit, but blower working. [ 1 Answers ]

The blower is working fine on our Heating and Air Conditioning unit but neither the Air or Heat will work. The emergency Heat works fine though. The unit is a Carrier with the words American Standard written on the outside fan unit. What should I look for before calling a tech or what would this be...

Carrier Thermostat went blank and heat no longer working [ 3 Answers ]

Hi, On Friday my Carrier Thermostat went blank... and the heat is no longer working. I am assuming this happened because the furnace is no longer given any direction on what to be doing. The thermostat does not take batteries, so that is not the problem. The fan was still running for the...

View more questions Search