Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing basement shower with bathtub..
[ 13 Answers ]
Hi guys. So, I need to replace a basement shower with a bathtub. I replaced tubs before, not that hard. However, I've never quite done this, and I'm concerned about the drain. Obviously, I'd like to move it a bit, maybe a foot or so. How hard is it to adapt what's there to a bathtub drain. ...
Replacing shower valve
[ 6 Answers ]
Remodeling our bathroom and need to switch out the shower valve. The walls are open, so everything is accessible. If it's harder than this, or I'm missing something, please let me know... All outside the wall... 1 - disassemble the guts of the valve so as to not damage it with heat 2 -...
Replacing bathtub spout w/shower diverter
[ 8 Answers ]
Hi, I have a Pegasus bathtub spout with a stuck shower diverter. I contacted customer support and was sent a replacement spout that does not fit. Currently I have a 3/4 inch copper pipe coming out of the wall approx 2 inches. I sent pictures of my application to Pegasus (the one on the left is the...
Replacing a shower with a bathtub
[ 1 Answers ]
The old shower pan was placed directly upon the foundation. The old shower had a center drain and in the foundation there is a diamond shaped cutout for the drain trap to pass through (see image). The tub needs a bed to support its entire base which needs to be about four inches higher than the...
Replacing bathtub and shower fixtures
[ 4 Answers ]
(1) When replacing bathtub "snout", shower controls etc.. Do you caulk around the fixtures or use plumbers puddy? The original installation had plumbers puddy. (2) Do you place the caulk so the fixtures "sqeeze" out some material or just inside the fixtures? Example: I've obtain some... View more questions Search
|