Ask Experts Questions for FREE Help !
Ask
    hhdevelopment's Avatar
    hhdevelopment Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 19, 2009, 05:12 PM
    Connecting the Transformer
    Bryant Gas force air Furnace.
    How should the transformer, the hi and low heating controls, the fan and the thermostate and electric power be connected?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Oct 20, 2009, 08:39 AM
    To many questions does the furnace not have a wiring diagram ? If not post the model number ,maybe someone can help you

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

24 V Transformer Bad, No AC [ 2 Answers ]

One hot Summer day, My Central Air went out, but the fan continued to run even when the thermostat was turned off. The smell of burnt electrical wiring throughout the house. I removed the front cover of the air handler, unplugged the 120 VAC power cord and When I checked the circuit it was...

Possible bad transformer? [ 9 Answers ]

I wanted to get a second opinion if the transformer on my ac is dead. I've been all over the net looking up info, and I think I got it figured out. Here's an overview of what was wrong and what I've done: Two units, one upstairs one down. Downstairs stopped working. No display on digital...

Transformer [ 5 Answers ]

How can you tell if you have blown a transformer? Also, does anyone know where I can find a part number for my transformer without being able to get to the part itself? I have a model number of 58PAV. The circuit board is HK42FZ009. I believe it is Carrier but not 100%

Connecting a power transformer to a light? [ 8 Answers ]

Hi, I have an outdoor lamp at my house that is/was using a power transformer for the lamp. First question: Why? The wires on one of the windings has been ripped off the unit and the base of the unit is very rusty. I do not know the manufacturer or the specs of the unit. So, I bought one,...

24v transformer bad [ 3 Answers ]

My 24v transformer is bad on my gas pack heat and ac unit. I replace the transformer 2 months ago... I replaced it again yesterday. This time it went bad in 4-hours. What is shorted to blow the transformer? Also, DC is used to pull the a/c and fan relays, right? Where is the 24v ac...


View more questions Search