Ask Experts Questions for FREE Help !
Ask
    topcat6's Avatar
    topcat6 Posts: 40, Reputation: 2
    Junior Member
    		  
    #1

    Oct 18, 2009, 09:25 AM
    Drywall outside corner
    When installing the galvanized outside corner, I've been told I need to use a specific type
    Of nail that won't rust when using joint compound. I have electro coated galvanized nails, will that be O.K.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Oct 18, 2009, 10:05 AM

    Never heard that, always used regular drywall nails. Mud dries out quickly so nail is not subjected to moisture any more than any other drywall fastener.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Drywall for corner greater/less than 90 degrees. [ 8 Answers ]

Any tips for hanging and finishing drywall on a corner that is not 90 degrees. There are two places where I will have greater than 90 degrees (approximately 135) for inside and outside corners. Is there a special corner bead strip or can I use regular corner bead and bend it? Thanks in advance...

Repair drywall seam around shower stall-some mold in drywall [ 3 Answers ]

Paint on drywall seam --10 in .that surromds ouside od shower stall has cracked. Pulling it off I discovered the mesh drywall tape below showed no signs of mud and was on top of dryall which now has developed a 6 in length of mold--- Painter 3-years ago did not do proper job-what to do?

New drywall meets old painted/textured drywall [ 3 Answers ]

I am finally finished with a 10 foot addition to the 2 bedrooms at the front of my home. Once the additional was final on the exterior, ie: masonry walls, roof framing, sheathing, etc. I was left with the final task of removing the original exterior mas. Wall down to the floorline. Once this was...

Need something to cover the corner between tile and drywall [ 3 Answers ]

We are tiling our shower and we've found that our walls are not square. At the corner where the tiled wall of the shower meets the regular dry-walled wall, there is a gap that gets wider as you get further down the wall. Is there something we can do that will cover this corner and the gap? It will...

Drywall corner technique [ 6 Answers ]

Well, I am progressing with my seemingly endless bathroom remodel and have a few drywll/mudding questions: 1) What are some techniques for neatly mudding and sanding the top ceiling corners where the 2 walls and ceiling meet? I have a corner sponge which is great for the long 2 wall corners but...

View more questions Search