 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Prog. Thermostat
I have 2 international comfort products on my roof
Model phad60nik6 Pymc60g6 Serial g043630974 I had a prog. Therm. Installed by a licensed air co.; model 44360 There are 6 wires coming from the walls Green, red, orange, white, yellow, and blue Current connections: Green wire ----> G No wire but a jumper from RH to RC Red wire ------> RH Ornage wire -----> Y/O White wire ----> W/B Yellow wire ----> Y1 Blue wire ---> not connected They came and installed these units in the summer. The air conditioning comes on and off according to requested home temperature no problem. The air conditioning adjusts with the times (cycles) as we programmed in. PROBLEM - now with some cooler weather, the heat goes on and stays on. It stays on even after it hits the programmed temperature. I called hunter and they indicated that the blue wire is "odd" and that thise 44360 model hunter there. Will not work. I am naturally apprehensive with the feedback from someone reading off a script. Is there anyone out there that knows these things and can help... I've purchased a honeywell there. But thought I'd check to see if the current hunter model 44360 was wired incorrectly (I do have the instructions but they are pretty poor) I've called service request air. Several times with no answer and they are not returning calls. I thought I could at least talk to a tech. as they should have indicated that the therm. Was the wrong one instead of installing this one. |
||||
|
||||
|
While the system is running and is supposed to be off according to the temperature inside, disconnect the W wire and wait to see if the system turns off.
Sounds like it was wired correctly. I'm going to get on my sandbox again!! Hunter, Noma, And several other big box store thermostats should stay on the shelf. I'm always charging people allot of money to install or replace these things. I don't understand why a contractor would install a Hunter stat, he prob' charged you a pretty penny for it too. |
||||
|
||||
|
Well, it finally cooled down enough to have the heat kick in and removing the white wire seems to have done the trick. Thanks for the quick response and more importantly, for the honest advise and answer. I will follow up with the company that installed this thing and advise them it was incorrectly installed / wired. Again, thanks!
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Sir I am working in indian air force and awaiting my final year results in bsc.I wanted to do mba from a reputed univ through dist. learning prog.kindly send me the list of univ offering that course.also please clarify me where does the pgdba stands w.r.t mba in today's world.and what are the...
Here is a question, I saw a posting question inquiring about a chat line program seen in the movie EUROtrip. I have some what of the same question... In the movie the main character has an Email Programthat says " Mail Fu**head!" I really though it might be interesting to have the program. I...
I want to replace my Trane Weathertron tstat with a Honeywell RTH7400 prog one. I have a Trane heat pump with aux heat. I've been poring over these thread piece-mealing some info the follow is the result. The old wiring scheme: X2 - black O - orange G - green Y - yellow T - tan/brown R -...
:( Here’s my problem: I have a basic thermostat. It's the one that has the needle on the right side. I set it to 78 deg. And my AC unit will not turn off until it reaches 74 deg.'s:confused: Then when the temperature gets to 76 deg.'s my AC starts back up again! :eek: (hence with out the...
Hi, We just replaced our thermostat. Seemed simple enough -- 4 wires, red, white, yellow, green. There is 24 V between red and all the others at the thermostat. When we set the temp to cool, you can hear the switch in the thermostat click, but no air comes out. It seems like the thermostat...
View more questions Search
|
