Ask Experts Questions for FREE Help !
Ask
    tmartin616's Avatar
    tmartin616 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 15, 2009, 05:32 AM
    Lennox Pulse cycles on and off every 2 minutes
    My Lennox Pulse cycles between ON and OFF every 2 minutes or so. Heat is fine, but blower doesn't stay on for long at all; and then comes back on quickly. And ideas?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 15, 2009, 09:42 AM
    Your unit might be cycling on the burner limit control OR the heat anticipator might need to be adjusted.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox Pulse Gas Furnace? [ 5 Answers ]

I am having a diagnostic "nightmare"... only due to lack of knowledge of the Lennox Pulse. This is a roughly '90 model. 80,000 BTU... The problem: Furnace lights for about 10 sec- 2 minutes... shuts down... It resembles a primary air problem, sounds of the fire sucking air. A previous tech just...

Lennox Pulse 21V [ 8 Answers ]

We have a 15 yr old furnace. A Harmony II thermostat for zone control A Lennox digital thermostat for the upstairs,honeywell dial type for the down. We have disconnected the zone control as per our furnace installers directions. While the upstairs digital is set for 72 the furnace...

Install Humidifier on Lennox Pulse Furnace [ 11 Answers ]

I want to install a whole house humidifier in a home with a Lennox Pulse furnace (Model Number G2103-80-1.) There's a schematice on the unit. I don't think it has a provision to provide power to the humidifier only when the heat is running, but I wanted to make sure. This is a really nice...

Lennox Pulse Gas Furnace [ 1 Answers ]

Could you Please guide me to a source to obtain the Schematic Diagram of Lennox G14 or G21 Pulse Gas Furnace? I could not find the company web site!

Lennox pulse furnace fails to remain started [ 1 Answers ]

I have a Lennox G21 pulse furnace installed in 1993. The unit will start to pulse briefly - maybe 5 seconds or so, and then shut off. We've had two service calls recently. On one call they replaced a flapper, and on the other call did the pressure test, which passed. I've done a visual...

View more questions Search