Ask Experts Questions for FREE Help !
Ask
    clearright's Avatar
    clearright Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2009, 04:22 PM
    6.0 low power after start
    After start low power, 1500 max rpm until warm up approx. 2min. After warm up run great.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Oct 12, 2009, 05:58 PM

    See if this diesel troubleshooting link helps:

    https://www.askmehelpdesk.com/cars-t...ml#post1415281

    Ensure the glow plugs and glow plug relay are operating properly. Make sure the oil and filter have been recently changed and that the oil is filled to "FULL." This affects fuel pressure of PSDs.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Car won't start, no click and no power to radio, power window or locks [ 6 Answers ]

After installing a new starter on a 1999 2WD Explorer it will not start. There is no click when trying to start it, its just dead, and the radio, power locks/windows, a/c, and dash light don't work but the interior lights work and so do the headlights. We've had the starter checked to make sure...

Ceiling fan won't start after power interrupt [ 1 Answers ]

What do you do to restart a litex fan when the pull chain or remote won't start it after a seconds power interrupt? Breakers, remote reverse switch are all fine. Is there some built in delay after power interrupts? This has happened several times over the last six months-the fan will start again...

Furnace doesn't start unless I cycle power [ 1 Answers ]

My furnace is 6 years old. I have 3 zones with a Honeywell zone controller. I replaced the ignition module and noticed and replaced a cracked gas exhaust tube - the tube that leads to the condensate trap. The furnace will work fine once I cycle the power. However in the morning (after all...

Auto start a computer after power restoration [ 6 Answers ]

I have numerous servers on a UPS. Is there a way that I can set the computers to automatically turn on once the power is restored?

Power but won't start [ 1 Answers ]

Whenever I try to star my truck it gives me no power like the battery was dead, however I still have lights and radio, what causes this?

View more questions Search