 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
That depends on exactly where your current drain is located. If it's a fiberglass enclosure now it must be standard so you may find one that works. Try opening my Swanstone link or the Schluter system link, both better options than a mud pan for a DIYer |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We have no hot water throughout any hot water faucet. The cold water is fine. I can here the water heater on and warming water and if you open the valve on heater there is hot water. But, there is no water or preasure in faucets.
Why is the hot water in the shower and lavatory running so slowly. The cold is fine and the outside faucet is fine.
I have read a few posts about this but here you go... When I turn the faucet on at all three sinks in my house (both bathrooms & kitchen sink) - I get what smells like 'sewage gas' for only about 5 seconds. It's not really strong - you almost have to put you nose down to the faucet. I don't...
I am not getting any hot water, actually not getting any water from any of my hot water faucets.
I am trying to get the estuechon(flared shell) off tub faucets to replace the washers on the valve stems. They are threaded on and have corroded so badly that I cannot turn them to remove so I can get to the valves. Does anyone have ideas on how I might get these off without tearing them to...
View more questions Search
|
