Ask Experts Questions for FREE Help !
Ask
    Van Johnson's Avatar
    Van Johnson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2006, 07:09 PM
    Furnace igniter fails to fire
    The furnace igniter fails to fully light the furnace. If I turn off the frurnace, then the igniter will fully work properly. Does theigniter need to be replaced?
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Nov 12, 2006, 07:49 PM
    I don't understand your description of the problem. You may have to give more details before anybody can help.
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #3

    Nov 12, 2006, 09:06 PM
    Is this a hot surface ignitor? If so and it glows bright enough to ignite the gas it is good, something else is wrong.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Jenn-air Gas Cooktop, Igniter Malfunction [ 4 Answers ]

I need help with a Jenn-Air Gas Cooktop, with all knobs in the off position, one of the igniters, sparks once, every 45 seconds on it's own. I have tried re-adjusting the knob to the off position but, this has no effect. Any ideas, to this mysterious spark? Thanks in advance, for any suggestions....

GE stove top igniter won't stop clicking. [ 1 Answers ]

GE stove top igniter won't stop clicking. All knobs are turned to off. Can I fixx it?

Carrier hsp gas valve/igniter control [ 2 Answers ]

Please help!! I have a carrier gas pack with a hsp valve/ignitor and after going through the ignition procedure I get nothing. I have replaced the inducer board and the inducer fan does work, however that is the only thing that appears to work. BEFORE spending another 150 bucks on the hsp...

View more questions Search