Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Proper wire sizing?
[ 3 Answers ]
We are re-routing the supply line to our pump house, where there is an extension panel with 30A 220V (pump controller) and 15A & 20A 110V breakers. It's about a 60' run from the 200A main service in the house, being placed in conduit 2' underground. The wire in place is newer 10 gauge solid copper....
Proper wire gage
[ 1 Answers ]
Currently my sub panel in the garage is supplied by 10 gage 2 wire with ground from a 30 amp dbl pull breaker in the house. The run is 30' to the 100 amp box in the garage. The garage is a part time workshop with several power tools on at the same time along with 10 4' fluorescent light fixtures...
Proper wire sizing?
[ 1 Answers ]
What is the wire size needed to run a 240 volt single phase 125 amp around 100 feet?
Proper wire and conduit size?
[ 2 Answers ]
Hi, I have just had a new pole building built. I had a 200 amp service installed. I will be installing 16 fluorescent light units. I will install them on at least 2, possibly 3 circuits. My question is what is the formula for figuring out the proper wire size, and how many of these conductors can I...
Proper gauge wire to run to hot tub?
[ 5 Answers ]
I am trying to run wiring from my main service panel to a hot tub on our back porch. My father was an electrician, so I have a fairly good base of knowledge, but I wish he was alive to help me out. To save on the electrician install, I was going to install the 240 breaker in the box and then run... View more questions Search
|