Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #21

    Sep 28, 2009, 08:57 PM

    Not if there is not enough current to light the bulb.

    This is why CFLs flicker in a remote fan when it's off.
    Pualani's Avatar
    Pualani Posts: 8, Reputation: 1
    New Member
    		  
    #22

    Sep 29, 2009, 11:23 AM

    Mr. CeilingFanRepair, thank you for sharing your expertise. Can you recommend anything to do to fix this problem?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #23

    Sep 29, 2009, 09:56 PM

    If everything else suggested doesn't work, you may need to replace the remote receiver.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan-light works-fan doesn't [ 6 Answers ]

I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...

Hampton Bay UC7083T Remote No More [ 3 Answers ]

I have a ceiling fan that until today has worked quite well with the remote. The LED light on the remote does not light up even after replacing the battery. There is no response from the fan or the lights to the remote. The fan will adjust with the pull chain, however, the lights do not turn on...

Hampton Bay touch light works by itself sometimes [ 3 Answers ]

I just installed a wall mounted "swing arm" Hampton Bay 3-way tough light. It works fine when I touch it to cycle through the 3 brightness levels and to off. The problem is that it will every so often cycle through all positions or cycle to one of the "on" positions, without being touched. I...

Hampton Bay Fan w/ Remote: Light Works, Fan Doesn't [ 4 Answers ]

Sorry if this has been answered elsewhere but I couldn't find what I was looking for. I just installed a Hampton Bay Andover fan w/ remote (no pull chains) but the fan won't start. The light fixture works fine (using the wall switch remote) but I can't get the fan going. I tried the reverse...

Hampton Bay light works, fan don't [ 3 Answers ]

Have a Hampton Bay 3 speed Carousel II (childs fan). Not on a remote. Lights work fine. Fan quit working recently. When turned on (pull chain) you can feel/hear slight hum but the blades just don't want to run and it seems hot to the touch. It turns freely by hand. Anyone have any...

View more questions Search