Ask Experts Questions for FREE Help !
Ask
    treedr02's Avatar
    treedr02 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 26, 2009, 07:30 PM
    Goodman heat/ac repair
    I have a goodman mdl tgb042125-1. ac works, heat doesnot. Light on board blinks twice. Appears to be board problem. Where can I find out for sure, and where can I get one
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Sep 27, 2009, 10:10 PM
    I have nothing on the model number you posted. Look again
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman heat pump does not switch on for heat and the AC blows A/H fuses. [ 4 Answers ]

My Goodman heat pump, model GSH130361AD, heat does not switch on (outer unit). When it first went out, the Honeywell T8411R t-stat digital display went blank. First, I tried replacing the stat with other, but they only accommodated 5 wires. Wiring to the Honeywell was 7 wires. I'll come back to...

Heat strip not working on my goodman heat pump [ 1 Answers ]

Heat strip not working on my goodman heat pump

Goodman furnace setting or repair [ 1 Answers ]

I have a High efficiency furnace. It is a Goodman Brand it indicates by 6 flashes that it has a open roll out. Is this a simple homeowner repair or solution.

Goodman 100-3 will not heat [ 6 Answers ]

Problem is with Goodman 100-3. The ignitor will glow and then go out. It does this 3 times then stops completely. No flames at all. Looking through manual can not find where the circuit board is located. I've been researching online and it states to watch for blinking lights from the circuit board...

Goodman AC/heat pump [ 1 Answers ]

I bought a new goodman AC/heat pump unit got it all installed and wired the inside unit fan runs great but the condensing unit fan and pump will not run after the timer goes off the condensing unit has an electrical hum but it won't start?? any idea what going on ?

View more questions Search