Ask Experts Questions for FREE Help !
Ask
    dvdv99's Avatar
    dvdv99 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2009, 07:48 AM
    Pool timers
    I have a pool sweep and pool filter. The pool sweep motor was replaced and
    All was well. When putting the cover back on the motor connections, the
    Wire must have been touching something on the motor. I turned the filter
    Switch with the timers, on and the breaker blew. Readjusting the motor wires
    I turned the breaker on, everything works well. However, I cannot
    Turn either of the timers off. Everything stays on, unless turned off
    At the breaker box. Any ideas?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Sep 25, 2009, 08:12 AM

    If there is relay or contact associated with the timers then the contacts may have fused. Can't help further without any model identification. Post any links concerning the timer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Noma out door timers with P C and E digital timers that do they mean for setting [ 4 Answers ]

Noma outdoor timers with P C and E digital timer programming what do they mean for setting

CFL timers [ 1 Answers ]

Hello My new home has 6 soffit lights with CFL bulbs and one with a halogen bulb on the same switch. Will an electronic timer still not work if I have supplied a "resistive" load to the system by way of the halogen bulb? My electrician says this will not work without a huge mechanical time r...

Timers for Internet [ 1 Answers ]

How do I set up timers for my kiddos when they get on the Internet so that they can only stay on the Internet for a certain amount of time? Thanks- Ann

View more questions Search