I have a pool sweep and pool filter. The pool sweep motor was replaced and
All was well. When putting the cover back on the motor connections, the
Wire must have been touching something on the motor. I turned the filter
Switch with the timers, on and the breaker blew. Readjusting the motor wires
I turned the breaker on, everything works well. However, I cannot
Turn either of the timers off. Everything stays on, unless turned off
At the breaker box. Any ideas?

If there is relay or contact associated with the timers then the contacts may have fused. Can't help further without any model identification. Post any links concerning the timer.