Ask Experts Questions for FREE Help !
Ask
    LARRYDUE's Avatar
    LARRYDUE Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Sep 22, 2009, 09:26 AM
    Disable kill switch
    How do I disable the seat kill switch on a Sears Craftsman lawn tractor. Model no. 917.289070 19 1/2 horse power new last week.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 22, 2009, 09:29 AM

    Which one, there are at least 3. There is a danger in doing this and many of us are hesitant to give advice that can put you in harms way. A replacemnet switch costs about $9 way not buy one rather than bypass?
    LARRYDUE's Avatar
    LARRYDUE Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Sep 22, 2009, 09:46 AM
    It is the seat switch. I have to sit on the back of the seat for about 10 sec. at one place I mow. There are 3 wires so I can't just unplug the switch. The engine wouldn't start then.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Sep 22, 2009, 09:53 AM

    Unplugging a 3 wire safety switch just makes your engine deader than a door nail. Most of the 3 wire switches use wires all the same color, black, so its hard to tell you how to make a jumper. Since you can get the engine to run by messing with the switch maybe it is just not getting proper contact with the seat. Try removing the switch completely and then hold it closed between your thumb and finger, does it start now?
    LARRYDUE's Avatar
    LARRYDUE Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Sep 22, 2009, 10:06 AM

    I haven't done anything yet. The mower is brand new so I don't want to mess it up. You are right all wires are black.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #6

    Sep 22, 2009, 10:25 AM

    Brand new, parts are warrantied so call Sears. They will oikely mail it to your in 4-6 days.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Disable Write Protection on USB Pen Drive(Dont have Switch) [ 14 Answers ]

Hi I have an old 2GB pen drive which shows that it is write protected.It doesnot have any switch and I have reinstalled the drivers but it doesn't seem to work. Help... Regards Darshan

Seat kill switch on poulan lawn tractor [ 4 Answers ]

Hey folks. My Poulan lawn tractor started to die every time I let the clutch out. An "expert" on another discussion board suggested that the problem was likely the seat emergency plug and it simply wasn't sensing that I was in the seat. To test the theory, he said I should clip the plug and bypass...

Kill switch [ 1 Answers ]

A friend rewired my craftsman mower,a 12 hp briggs. Push one toggle switch, the mower starts,then to turn off you get off and lift arm that engages blades. That engauges safety and engine stops. The system seems to always hot.

Connecting a kill switch [ 5 Answers ]

How do I connect a kill switch on a b&s 14.5hp key/pull start engine for a craftsman lawn tractor. Does it need to be connected

Craftsman mower kill switch [ 1 Answers ]

I got off the lawnmower while it was running to move a toy and the mower stopped, but now I can't get it started again. Am I missing something? I tried shifting to neutral, disengaging the blades and pushing in the clutch before I tried to start it again, but it's like I'm getting no juice from...

View more questions Search