Ask Experts Questions for FREE Help !
Ask
    Robertheard's Avatar
    Robertheard Posts: 19, Reputation: 1
    New Member
     
    #1

    Sep 20, 2009, 06:19 PM
    Garage wiring
    Revised question:
    Im rewiring part of my garage with 12-gauge wire for lighting only. My question is this ,I used metal shield flex cable call flex MC has a black ,white and green wire in it, cable is flexable metal casing .I was wondering if this is with code for PA. I have my main power cable going into a switch box nailed onto the cinderblock wall then the mc flex cable comes out of the switch box up the cinderblox wall then through 4 joists then runs down one joist to two ceiling boxes where I will eventually attach 2 , 8 foot fluorescent lights.
    Did I use the correct wire or should I have just use a non metalic-shielded cable. I used the metallic cable because I had to run the wires up the cinderblox wall and thought it be safer to use metallic shielded cable so then ran the entire run metallic. I will eventually be putting 5/8 drywall on the ceiling with non faced insulation on the ceiling,Will this be a concern with the metallic flex mc cable.
    Sorry about the long story,but if I need to rewire anything it would be easier to di it now then later.
    Thank You
    Rob
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Sep 21, 2009, 04:12 PM

    Yes, MC cable should be just fine.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Undergound wiring to garage [ 1 Answers ]

How deep to I have to go, do I need conduit, what gauge do I use for a 50A service line to tha garage

Garage Wiring [ 1 Answers ]

Hi; I have a detached two car garage and I want to wire it. There is a small concrete patio that we poured between the house and garage. We put a 1 1/4 inch PVC under the ground and brought it into the garage. My father in law ran 12/3 THWU through the coduit and left it unattached. I want to...

Garage wiring [ 2 Answers ]

Well I am new here and I hope that you guys can help me out I am going to be putting in a 220v 50 amp outlet and I need to know what size wire I need to use nay help will be greatly appreciated thak you . p.s. I am going to be using this outlet primarily for an arc welder thanks

Wiring to garage [ 5 Answers ]

Hi, I build a detached garage and I put 1" conduit erom house to backyard and then underground to garage.I want to instal 60 amp subpanel for feed some 220 and 110 outlets and 6-8 florecent light plus some for extrior ligts.I want to use this garage as my hobby shop so I will put some equipment...

What wiring to run for a garage? [ 2 Answers ]

I've run conduit to my garage and now I need to know what type of wire to put through it. I plan to have 3 circuits: one is 220, for an irrigation pump; another is unswitched 110 for some standard outlets for power tools (drill, battery charger, etc, that will not be running all the time or...


View more questions Search