Ask Experts Questions for FREE Help !
Ask
    leoncentral's Avatar
    leoncentral Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 16, 2009, 01:14 PM
    Light Kit for Babiberre fan
    We have purchased 4 Hampton Bay Babiberre fans. The box says that the fans are light kit adaptable and the kits are special order only. Home Depot has no information. Someone from customer service at a number provided by Hampton Bay said that the fans use a universal light kit. NO Way... The base of the fan that a light kit attaches to is roughly 3 1/2 inch. The universal light kits have approximately 4 1/2 base that attaches to the fan. Does anyone have a solution. If we order the kits and they do not work, Home Depot said they would charge us a 15% restocking fee.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Sep 21, 2009, 06:22 PM

    I looked on the web page. A universal light kit will fit on there however it won't look right, you can order a matching light kit through Home Depot special order. Ask the people in the Electrical department.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Propane Furnace won't start no pilot light red light flashes 3 times [ 6 Answers ]

My propane furnace G6RC has no visible flame and the red light either stays on or flashes 3 times in a row and then the furnace shuts off and tries to restart

99 Honda accord no parking lights or dashboard background light + SRS Light on [ 3 Answers ]

Recently I believe a problematic bulb caused a short in my car's Electrical system. The reason I say this, is that the following Problems have come up since I used the trailer... 1. SRS light is now on 2. The light that illuminates the spedometer, RPM's, and gas (background light) doesn't...

Leviton PR150 Motion LIght Control Flickers light instead of keeping them on [ 4 Answers ]

Hello, I installed a Leviton Motion Sensor Light Control (PR150). In the on position it works fine, the lights are one. But on auto it seems to only flicker the lights. They do not get to full brightness and they flash. It looks like the sensor is also acting weird as the LED light on the...

80s Chev truck, brake light - tail light troubleshoot [ 1 Answers ]

Help me please. Have early 80s chev pu... Front L turn signal light comes on when brake is applied... Seen a few of these on the road... Could this be a chev problem? Or just an electrical problem? Is there an obvious answer? Thanks, David

Light at own home produces sound when light at neighbor's house is switched on [ 4 Answers ]

I've moved into an apartment. I noticed that whenever I switched on my fluorescence light and when my neighbor switches on his light, my fluorescence light would produce a 'rrrrr' or 'mmm' sound which sometimes can be loud and irritating. I have tried changing the light bulb and even the ballast...

View more questions Search