Ask Experts Questions for FREE Help !
Ask
    phallsjewelry's Avatar
    phallsjewelry Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 14, 2009, 09:33 PM
    Old iron wedge with a ring through it
    I found an old iron wedge with a hole in the thick end and an iron ring through it. It was approx. 3ft. Down in the sand. It is not a very thick wedge. It is about 8" long. The ring is thick and you can hold it in your hand easily. Does anyone know what this might have been used for?
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #2

    Sep 16, 2009, 12:53 AM
    Hi, phallsjewelry!

    Would it be possible for you to post an image of it on this thread? We don't guarantee results, but we can try!

    Thanks!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wedge-Lok recessed shower seal leaking [ 4 Answers ]

I did a quick search on but, was not able to answer my question. Upstairs shower was leaking, running in ceiling and leaking out of a can light in the kitchen. Now here is the comical side to this... the can light its leaking out of is directly over the sink! We quit using the shower and now...

Corner/Wedge Crack repair [ 1 Answers ]

Thanks for the help in previously posted questions. What's the best way to repair a corner/wedge crack in a slab on grade, brick faced home? These are extremely common here in south/central Texas... nearly every house in my subdivision has them.

Volume of wedge [ 3 Answers ]

Here's another challenge problem if anyone would like a go. Please excuse my hackneyed paint drawing. I hope it's OK. "A wedge is cut from a right circular cylinder of radius r by two planes, one perpendicular to the axis of the cylinder and the other making an angle @ with the first. Find...

Wedge-loc drain [ 1 Answers ]

I am installing a shower receptor with a "wedge-loc" drain. It looks simple however they failed to send instructions on how to install the thing. Does the rubber donut simply slide over the 2" waste pipe or is the donut inserted into the drin hole in the receptor and then the 2" pipe pushed through.

Replacing Wedge Lok Seal [ 3 Answers ]

I've got a leak in a shower pan and have narrowed it down to a Wedge Lok Seal. The local plumbing supply center gave me one, which was nice, but they couldn't offer much advice on removing the old one and installing the new one. Anyone done this before?

View more questions Search