Ask Experts Questions for FREE Help !
Ask
    dme123's Avatar
    dme123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 8, 2008, 04:45 PM
    Wedge-loc drain
    I am installing a shower receptor with a "wedge-loc" drain. It looks simple however they failed to send instructions on how to install the thing. Does the rubber donut simply slide over the 2" waste pipe or is the donut inserted into the drin hole in the receptor and then the 2" pipe pushed through.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Feb 8, 2008, 05:38 PM
    Hey dme123... install the pipe through first.. then soap up that rubber a bit and slideover pipe. Good luck!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ok to tie a wet bar drain into a drain pipe coming from 1st floor. [ 6 Answers ]

I'm finishing my basement in a newer house and want to add a wet bar. There is a 2" PVC drain pipe coming from the 1st floor that is for the washing machine drain. It has a clean out plug on it also. Can I just add a wye or Santee for the bar drain and do I need an Air Admittance Valve for venting....

Outgoing Drain Behind Vanity Cabinet Not Aligned with Sink Drain Tube in New Sinktop [ 1 Answers ]

I'm installing a new vanity cabinet and new marble vanity top, both slightly larger than the originals. The problem we've encountered is that the drainage pipe that will exit sink water from the sink to the house -- the PVC pipe in the house/wall -- is not aligned with the new location of the sink...

Average LOC [ 1 Answers ]

What is average lines of code per day by a developer?

Replacing Wedge Lok Seal [ 3 Answers ]

I've got a leak in a shower pan and have narrowed it down to a Wedge Lok Seal. The local plumbing supply center gave me one, which was nice, but they couldn't offer much advice on removing the old one and installing the new one. Anyone done this before?

View more questions Search